The behavior of RuboCop can be controlled via the .rubocop.yml configuration file. It makes it possible to enable/disable certain cops (checks) and to alter their behavior if they accept any parameters. The file can be placed either in your home directory or in some project directory.
RuboCop will start looking for the configuration file in the directory where the inspected file is and continue its way up to the root directory.
The file has the following format:
inherit_from: ../.rubocop.yml Style/Encoding: Enabled: false Metrics/LineLength: Max: 99
Note: Qualifying cop name with its type, e.g.,
Style, is recommended,
but not necessary as long as the cop name is unique across all types.
RuboCop supports inheriting configuration from one or more supplemental
configuration files at runtime. Settings in the file that inherits
override settings in the file that's inherited from. Configuration
parameter that are hashes, for example
Style/CollectionMethods are merged with the same parameter in the base
configuration, while other parameter, such as
simply replaced by the local setting. If arrays were merged, there would
be no way to remove elements through overriding them in local
configuration. There is a way to have specific array settings merged using
Inheriting from another configuration file in the project
inherit_from directive is used to include configuration
from one or more files. This makes it possible to have the common
project settings in the
.rubocop.yml file at the project root, and
then only the deviations from those rules in the subdirectories. The
files can be given with absolute paths or paths relative to the file
where they are referenced. The settings after an
directive override any settings in the file(s) inherited from. When
multiple files are included, the first file in the list has the lowest
precedence and the last one has the highest. The format for multiple
inherit_from: - ../.rubocop.yml - ../conf/.rubocop.yml
Inheriting configuration from a remote URL
inherit_from directive can contain a full url to a remote
file. This makes it possible to have common project settings stored on a http
server and shared between many projects.
The remote config file is cached locally and is only updated if:
- The file does not exist.
- The file has not been updated in the last 24 hours.
- The remote copy has a newer modification time than the local copy.
You can inherit from both remote and local files in the same config and the same inheritance rules apply to remote URLs and inheriting from local files where the first file in the list has the lowest precedence and the last one has the highest. The format for multiple inheritance using URLs is:
inherit_from: - http://www.example.com/rubocop.yml - ../.rubocop.yml
Inheriting configuration from a dependency gem
inherit_gem directive is used to include configuration from
one or more gems external to the current project. This makes it possible to
inherit a shared dependency's RuboCop configuration that can be used from
multiple disparate projects.
Configurations inherited in this way will be essentially prepended to the
inherit_from directive, such that the
inherit_gem configurations will be
loaded first, then the
inherit_from relative file paths will be loaded
(overriding the configurations from the gems), and finally the remaining
directives in the configuration file will supersede any of the inherited
configurations. This means the configurations inherited from one or more gems
have the lowest precedence of inheritance.
The directive should be formatted as a YAML Hash using the gem name as the key and the relative path within the gem as the value:
inherit_gem: my-shared-gem: .rubocop.yml cucumber: conf/rubocop.yml
An array can also be used as the value to include multiple configuration files from a single gem:
inherit_gem: my-shared-gem: - default.yml - strict.yml
Note: If the shared dependency is declared using a Bundler
Gemfile and the gem was installed using
bundle install, it would be
necessary to also invoke RuboCop using Bundler in order to find the
dependency's installation path at runtime:
$ bundle exec rubocop <options...>
Merging arrays using inherit_mode
The optional directive
inherit_mode is used to specify which configuration
keys that have array values should be merged together instead of overriding the
One caveat is that this directive only works with local and inherited configuration files, it is unable to merge with the default.yml config.
Given the following config:
# .rubocop.yml inherit_from: - shared.yml inherit_mode: merge: - Exclude Style/For: Exclude: - bar.rb
# .shared.yml Style/For: Exclude: - foo.rb
The list of
Excludes for the
Style/For cop in this example will be
The directive can also be used on individual cop configurations to override the global setting.
inherit_from: - shared.yml inherit_mode: merge: - Exclude Style/For: inherit_mode: override: - Exclude Exclude: - bar.rb
In this example the
Exclude would only include
under the RuboCop home directory contains the default settings that
all configurations inherit from. Project and personal
files need only make settings that are different from the default
ones. If there is no
.rubocop.yml file in the project or home
config/default.yml will be used.
RuboCop does a recursive file search starting from the directory it is
run in, or directories given as command line arguments. Files that
match any pattern listed under
Include and extensionless
files with a hash-bang (
#!) declaration containing one of the known
ruby interpreters listed under
inspected, unless the file also matches a pattern in
Exclude. Hidden directories (i.e., directories whose names
start with a dot) are not searched by default. If you'd like RuboCop
to check files that are not included by default, you'll need to pass
them in on the command line, or to add entries for them under
Here is an example that might be used for a Rails project:
AllCops: Exclude: - 'db/**/*' - 'config/**/*' - 'script/**/*' - !ruby/regexp /old_and_unused\.rb$/ # other configuration # ...
.rubocop.yml and any other configuration file beginning with
files and directories are specified relative to the directory where the
configuration file is. In configuration files that don't begin with
our_company_defaults.yml, paths are relative to the directory where
rubocop is run.
Note: Patterns that are just a file name, e.g.
Rakefile, will match
that file name in any directory, but this pattern style is deprecated. The
correct way to match the file in any directory, including the current, is
Note: The pattern
config/** will match any file recursively under
config, but this pattern style is deprecated and should be replaced by
Exclude parameters are special. They are
valid for the directory tree starting where they are defined. They are not
shadowed by the setting of
Exclude in other
files in subdirectories. This is different from all other parameters, who
follow RuboCop's general principle that configuration for an inspected file
is taken from the nearest
.rubocop.yml, searching upwards. This behavior
will be overridden if you specify the
--ignore-parent-exclusion command line
Cops can be run only on specific sets of files when that's needed (for
instance you might want to run some Rails model checks only on files whose
app/models/*.rb). All cops support the
Rails/HasAndBelongsToMany: Include: - app/models/*.rb
Cops can also exclude only specific sets of files when that's needed (for
instance you might want to run some cop only on a specific file). All cops support the
Rails/HasAndBelongsToMany: Exclude: - app/models/problematic.rb
Generic configuration parameters
In addition to
Exclude, the following parameters are available
for every cop.
Specific cops can be disabled by setting
false for that specific cop.
Metrics/LineLength: Enabled: false
Most cops are enabled by default. Some cops, configured in
are disabled by default. The cop enabling process can be altered by
EnabledByDefault (but not both) to
AllCops: DisabledByDefault: true
All cops are then disabled by default, and only cops appearing in user
configuration files are enabled.
Enabled: true does not have to be
set for cops in user configuration. They will be enabled anyway. It is also
possible to enable entire departments by adding for example
Style: Enabled: true
The exception to the rule is the
Rails department, which can not be enabled
in its entirety this way. Setting
Rails: Enabled: true will have the same
effect as running with the
--rails command line option, which in the context
DisabledByDefault: true means to make it possible to enable Rails cops
AllCops: EnabledByDefault: true
All cops are then enabled by default, and only cops explicitly disabled
Enabled: false in user configuration files are enabled.
Each cop has a default severity level based on which department it belongs
to. The level is normally
convention for all the
others, but this can be changed in user configuration. Cops can customize their
severity level. Allowed values are
There is one exception from the general rule above and that is
special cop that checks for syntax errors before the other cops are invoked. It
can not be disabled and its severity (
fatal) can not be changed in
Lint: Severity: error Metrics/CyclomaticComplexity: Severity: warning
Individual cops can be embellished with extra details in offense messages:
Metrics/LineLength: Details: >- If lines are too short, text becomes hard to read because you must constantly jump from one line to the next while reading. If lines are too long, the line jumping becomes too hard because you "lose the line" while going back to the start of the next line. 80 characters is a good compromise.
Cops that support the
--auto-correct option can have that support
disabled. For example:
Style/PerlBackrefs: AutoCorrect: false
Setting the target Ruby version
Some checks are dependent on the version of the Ruby interpreter which the
inspected code must run on. For example, enforcing using Ruby 2.3+ safe
navigation operator rather than
try can help make your code shorter and
more consistent... unless it must run on Ruby 2.2.
.ruby-version exists in the directory RuboCop is invoked in, RuboCop
will use the version specified by it. Otherwise, users may let RuboCop
know the oldest version of Ruby which your project supports with:
AllCops: TargetRubyVersion: 2.2
Automatically Generated Configuration
If you have a code base with an overwhelming amount of offenses, it can
be a good idea to use
rubocop --auto-gen-config and add an
inherit_from: .rubocop_todo.yml in your
.rubocop.yml. The generated
.rubocop_todo.yml contains configuration to disable cops that
currently detect an offense in the code by excluding the offending
files, or disabling the cop altogether once a file count limit has been
By adding the option
--exclude-limit COUNT, e.g.,
--auto-gen-config --exclude-limit 5, you can change how many files are
excluded before the cop is entirely disabled. The default COUNT is 15.
Then you can start removing the entries in the generated
.rubocop_todo.yml file one by one as you work through all the offenses
in the code.
Updating the configuration file
When you update RuboCop version, sometimes you need to change
If you use mry, you can update
to latest version automatically.
$ gem install mry # Update to latest version $ mry .rubocop.yml # Update to specified version $ mry --target=0.48.0 .rubocop.yml
See https://github.com/pocke/mry for more information.
Disabling Cops within Source Code
One or more individual cops can be disabled locally in a section of a file by adding a comment such as
# rubocop:disable Metrics/LineLength, Style/StringLiterals [...] # rubocop:enable Metrics/LineLength, Style/StringLiterals
You can also disable all cops with
# rubocop:disable all [...] # rubocop:enable all
One or more cops can be disabled on a single line with an end-of-line comment.
for x in (0..19) # rubocop:disable Style/For